RO System if untreated cause several problems like inorganic, organic, colloidal and bio fouling resulting in reduced permeate recovery, increased pressure differential & permeate conductivity, frequent membrane cleaning ultimately premature membrane failure.
Scaling elements like carbonates, sulphates, silicates, iron, fluoride and aluminium reduce the permeability of RO system and hinders the product water flow. Aqua floc additives are highly effective threshold agent inhibit precipitation of these salts by increasing their solubility limit. It is also acts as iron sequester thereby reduces iron fouling.
Descaling/Chemical cleaning is more effective as the removal of inorganic and organic foulants from process lines, equipments, surface etc. Cleaning should be a combination of three elements i.e. Solvents (acid, alkali, surfactant), Fluid velocity (stirring, spraying, agitation, air rumbling and steam addition etc.) Heat (hot water or hot surface). Cleaning is divided into two categories: pre operational cleaning and routine maintenance cleaning.
A complete Descaling/Cleaning practice should consists of safe and uniform cleaning of deposit (scaling/ rust) from the heat transfer surface without metal corrosion during cleaning procedure. Descaling program includes scale softening, uniform & fast cleaning followed by proper passivation.
The treatment of water for steam generation is one of the most significant branches of water chemistry. Industries use steam, either in the process or generating power.
Generation of steam is energy intensive and costly, therefore efficient production and utilization of steam is a prerequisite to keep over all cost of production down. Strategy for the boiler water treatment should be to use the boiler that operates with the highest efficiency for the longest possible time.
Boiler water should be treated properly to prevent pitting/corrosion, scaling and carryover even hot blast of tubes. Using some of the specific result oriented additives can prevent these problems to facilitate fast, safe & reliable steam generation.
Aquafloc fuel additives/fireside is designed keeping in mind typical fuel oil related problems and overall improvement in fuel economy use of Aqua Tech fuel additives insures reduction in oil sludge, prevention of corrosion in oil storage tank, pipelines and an objective of cleaner environment.
Aquafloc fuel additives also help to improve overall combustion efficiency by reduction in soot and clinker formation as well as stack temperature. Fireside chemicals contain silicate based combustion catalyst, slag modifiers, corrosion inhibitors and dust suppressants that help overall combustion resulting in better system performance.
The Primary objective of cooling water treatment is to facilitate easy heat rejection and minimize water consumption. Cooling involves the transfer of heat (Btu’s Kcal/Kg) from one substance to be cooled, and the one that receives the heat is referred to as the coolant. Cooling water for the industries if untreated cause several problem i.e. Corrosion, scaling, fouling & microbiological growth in cooling towers, condensers, coolers and other parts, resulting in production loss, equipment failure and breakdowns. These problems can be overcome by using corrosion inhibitors, scale inhibitors, dispersants & biocides.
Aqua Tech offers a range of speciality sugar chemicals. Our range includes and inorganic anti-scalents, biocides and sugar juice coagulants.
|AX-3118||Evaporater Anti Scalent||Organophosphonate & LMW polymer|
|AX-3124||Viscosity Reducer||Sulfosuccinate Sulfoester|
|AX-3110||Mill Sanitation Biocide||Q.A.C.(B.K.C. -50%) base|
|AX-3189||Mill Sanitation Biocide||S.D.M.D.C. base|
|AX-3199||Defoaming Agent||Silicon base|
|AX-3197||Defoaming Agent||Non Silicon base|
• Hardness • Chloride • Alkalinity • Phosphate • Sulphate • Sulphite • Nitrite • Iron • DO • Silica • Hydrazine • Fluoride etc. & various process Chemicals for • Paper • Sugar • Distillery etc.